Jaykrishna Magnetics Pvt. Ltd manufactured vibrating furnace chargers are a one-stop effective solution to problems such as higher labor cost, hazards to fund operators faced in foundries, melting shops etc. Such a kind of automation allows foundry men to work at a safe distance thus preventing injuries arising out of molten splash.
Our vibrating furnace charger facilitates rapid and quick charging of the furnace thereby allowing maximum utilization of the furnace.
Operating Principle :
In a vibratory furnace charger, an amount of scrap metal is loaded into the storage hopper at the loading point. The trolley carries the vibrating feeder along with the storage hopper to the furnace charging point. Here, the vibrating feeder is energized and the material is effectively discharged into the furnace as per the required capacity. As the metal is melted down, a fresh batch of metal can be fed into the furnace thereby keeping the furnace full. The capacity of the vibrating feeder can be varied by varying the amplitude of variations. The amplitude of vibrations can be controlled just by adjusting on a variable frequency drive (optional). A control panel specially i.e designed to suit individual client requirements depending on the sequence of operations required is provided.
Watch Video Of Vibratory Furnace Charger:
- Very fast as compared to manual charging.
- Minimum heat loss.
- No chance of direct exposure of manpower to the furnace thereby preventing dangerous accidents due to mental splash.
- Prevent damage to the furnace.