Jaykrishna magnetics suspension type magnets are mainly useful for products carried by the conveyor belt.
Use of suspension type magnet is recommended for products with low contamination. If the frequency of the impurities is too high, suspension type magnet will make a layer shunting magnetic field. It will require frequent cleaning.
Our Product Video:
JMPL magnets can be installed either at the end of the belt above the head drum (Fig 1), or across the conveyor belt (Fig. 2).
In both cases, to avoid disturbances to the magnetic field, magnetic parts must be placed below the surface of the magnet.
The installation shown in figure 1 is preferable for high speeds. Separation is more efficient due to the trajectory of the fact that it is then “fluidized”.